LEICA DISTO X6 - COMPLETE FAQ
Up to 250 m.
m, cm, mm, ft, in, ft+in, fractional inches, decimal inches.
–10°C to +50°C (operating), –25°C to +70°C (storage).
Yes—the X6 has an extending tail piece for measuring from internal corners and recesses. When the tail piece is extended, the DISTO automatically switches the reference point and automatically adds the tail‑piece length onto the measurement, ensuring accurate corner readings.
Single, continuous, Min/Max, area, volume, indirect height, smart horizontal, stake‑out, angle, tilt, P2P, 3D, façade, timer, memory, add/subtract.
Yes—the + and – keys allow you to add or subtract measurements directly on the device, ideal for combining multiple distances or adjusting totals.
Built‑in rechargeable battery.
10 hours runtime; approx 2 hours charging.
Battery indicator + automatic power‑off.
Battery level indicator + automatic power‑off.
Yes—internal battery pre‑installed.
-
DST360‑X smart adapter (not motorised—contains electronic encoders)
-
TRI120 tripod
-
Hard carry case
-
USB‑C cable
-
Pouch
-
Documentation
The electronic encoders in the DST360‑X allow the X6 to perform true P2P, 3D, façade, and advanced survey workflows, measuring rotation left/right and up/down precisely.
Yes—2D + 3D CAD via DISTO Plan.A: Yes—2D + 3D CAD via DISTO Plan.
Clean lens and camera window, store in case, avoid impacts.
-
156: Weak signal → zoom, target plate
-
204: Out of range → stabilise
-
255: Tilt error → recalibrate
-
301: P2P error → level DST360‑X
-
401: Bluetooth failure → toggle Bluetooth
-
501: Lens/camera dirty → clean both
-
601: USB cable error → use Leica cable
